Skip to product information
Sediment Cartridge 10″ × 2.5″, 5 Micron

5 Micron PP Sediment Filter — 10″ × 2.5″

HFS-F01M-PP1025

Keep sand, dirt and rust out of the next stage.

Replace the loaded sediment cartridge in your 10″ × 2.5″ housing. Polypropylene media captures particles before they reach downstream filters.

  • Captures fine sediment, dirt and rust.
  • Helps protect the filters that follow.
$15.00
Taxes included.

Free shipping over $100

Bulk pricing No account needed
Qty Each Save
1 $15.00 —
2 $14.73 each 2%
4 $13.64 each 9% · free postage
6 $12.87 each 14% · free postage
8 $12.40 each 17% · free postage
10 $12.09 each 19% · free postage
More than 12, or want 30-day account terms?
5 Micron PP Sediment Filter — 10″ × 2.5″ 5 Micron CTO Carbon Block Filter — 10″ × 2.5″
Changing both stages at once?

The 10″ × 2.5″ Sediment & Carbon Replacement Pack has this cartridge plus one more stage.

$42.00 View pack
5 Micron PP Sediment Filter — 10″ × 2.5″ 5 Micron CTO Carbon Block Filter — 10″ × 2.5″ RO Replacement Membrane — HFS-ROM-75 RO Inline Mineralising Replacement Filter
Changing all four stages at once?

The Four-Stage Reverse Osmosis Replacement Filter Pack has this cartridge plus three more stages.

$145.00$158.43 View pack
1 / 2

Measure these two.

Measure the cartridge you're replacing, not its housing.

A filter cartridge with two measurements marked: A, overall length end to end including caps or connectors; B, widest outside diameter.
A Overall length — end to end, including caps or connectors
B Outer diameter — at the widest point of the body

Will it fit?

Match the 10″ × 2.5″ format.

Compare your current cartridge’s overall length, widest diameter and end seals. 10″ × 2.5″ is a nominal format, so check the cartridge itself before ordering.

Measured it and still not sure?

Send a photo of the cartridge beside a tape measure and we'll tell you which size it is.

Call 0474 189 347 or email sales@homefiltrationsystems.com.

Contact us

Nominal sizes vary a little between makers, so match the measurement rather than the label. What we can't tell you is how ours compares to a cartridge we didn't make and haven't tested, or whether a replacement affects your housing's own warranty; that one is between you and its manufacturer.

Fitting it, and what comes out

Cartridge installation and replacement guide

Follow the instructions for your existing system.

Download the replacement guide (PDF)

Need help with the change? Call 0474 189 347.

What happens, in order

  1. Isolate & release pressureShut off or bypass the supply. Release pressure.
  2. Replace the cartridgeFit the matched cartridge. Check and lubricate seals as directed.
  3. Flush & checkRestore slowly. Flush as directed and check for leaks.
  4. Record the changeRecord the date. Check cartridge condition and flow regularly.

Reviews

What people who fitted it said.

Only buyers we can match to an order can leave one, so the count is lower than it would be otherwise.

FAQ

Before you order

Talk to someone

Need help choosing? Call 0474 189 347.

Will it fit my housing?

It uses the 10″ × 2.5″ nominal cartridge format. Compare the actual length, diameter and end seals with your current cartridge before ordering.

When should I replace it?

Plan to replace it every 6–12 months. Water quality and use can require earlier changes.

Will it improve chlorine taste?

Sediment media targets particles. For chlorine taste and odour, use the carbon stage specified for your system.